Care for the appearance of indoor plants

in #arab6 years ago (edited)


The appearance of the internal plants and their appearance depends on several factors including:

pruning-plants1.jpg
source

The components of the pot in which the plant is placed.
Usually, the plants are placed in normal vessels, not aesthetic. As a teacher, we have to add an aesthetic touch to this container by placing it inside another beautiful container of wicker, ceramic, pottery or other. Here, do not forget that this other bowl is the dish that receives excess water during irrigation And sometimes not, then a pot must be placed to take up excess water.

Stems that are used to base the plant, especially if it is a climber or pestle, are usually alabaster columns, but the absence of algae always resort to the raw materials of the local environment and we use the cannabis or the palm of the palm less rough, and may be the stems of bamboo or dry reeds, or from Galvanized and galvanized wire to resist rust.
Sometimes we use different forms of reinforcement such as net reinforcement, curved shapes, or multiple straight struts. There are several methods of consolidation that take different forms depending on the type of plant and the taste of the breeder.

The proper way to trim and trim it if necessary and usually resort to pruning to stimulate growth and flowering in plants as well as to trim the shape of the plant outside and make it more attractive and beautiful and must take into account several things when pruning them:

Use the correct tool appropriate for that.

Choose the location of the pieces carefully so that it is above the bud to grow from, not too far or too close and the slant below it is far from the bud.

Choosing the Right Pruning Date Normally pruning is done during the spring period (from mid to the end of April).

pruning.jpg
source

The selection of the branches to be trimmed is good. The older interlocking branches are trimmed and the modern branches can not be distinguished and can be distinguished by their large size and stiffness compared to the modern branches.


مظهر النباتات الداخلية ومظهرها الخارجي يعتمد على عدة عوامل منها:

مكونات الوعاء (الأص) الذي توضع فيه النبتة.
عادة توضع النباتات في أوعية عادية لا شكل جمالي لها فنضطر كمربين أن نضيف لمسة جمالية على هذا الوعاء بوضعه داخل وعاء آخر جميل تختاره من الخوص أو السيراميك أو الفخار أو غيرها، وهنا لا ننسى أن الوعاء الآخر هذا يقوم مقام الصحن الذي يتلقف الماء الزائد أثناء الري وأحياناً لا، عندئذٍ لا بد من وضع إناء يتلقف الماء الزائد.
الدعامات التي تستخدم ليستند عليها النبات خاصةً إذا كان من المتسلقات أو المدادات، فعادةً تكون أعمدة طحلبية ولكن لعدم توفر الطحالب دائماً نلجأ لخامات البيئة المحلية ونستخدم الخيش (القنب) أو ليف النخيل الأقل خشونة، وقد تكون من سيقان نبات الخيزران أو القصب الجافة، أو من الأسلاك القابلة للتشكيل والمجلفنة لتقاوم الصدأ ويمكن أن نستخدم مثلاً علاق الملابس.
وأحيانا نستخدم أشكال مختلفة من التدعيم مثل التدعيم الشبكي، أو الأشكال المنحنية، أو الدعامات المستقيمة المتعددة وهناك عدة طرق للتدعيم تأخذ أشكالاً مختلفة حسب نوع النبات وذوق المربي.
الطريقة السليمة لتقليمه وتهذيبه إن دعت الحاجة لذلك وعادةً نلجأ للتقليم لتحفيز النمو والإزهار في النباتات وكذلك لتهذيب شكل النبتة الخارجي وجعله أكثر جاذبية وجمالاً ويجب مراعاة أمور عدة عند التقليم منها:
استخدام الأداة الصحيحة المناسبة لذلك.
اختيار مكان القطع بعناية شديدة بحيث يكون فوق البرعم المراد نشوء النمو منه وليس بعيد جداً ولا قريب جدا ويكون القطع مائلاً أسفله هو البعيد عن البرعم.
اختيار موعد التقليم المناسب فعادةً يتم التقليم خلال فترة الربيع (من منتصف إلى نهاية أبريل).
حسن اختيار الفروع التي سيتم تقليمها، حيث يتم تقليم الفروع الزائدة المتشابكة الأقدم ولا تقلم الفروع الحديثة ويمكن تمييزها بحجمها الكبير وقوامها القاسي مقارنةً مع الأفرع الحديثة.

shootphot 2.png

Coin Marketplace

STEEM 0.35
TRX 0.12
JST 0.040
BTC 70601.11
ETH 3576.21
USDT 1.00
SBD 4.78