Physics - Electromagnetism - Antenna Radiation Patterns

in #busy6 years ago (edited)

[Image 1]

There will be references to all the images by the end of this article!

Introduction

    Hello it's a me again Drifter Programming! Today we continue with Electromagnetism to talk about the final topic of this "chapter" (and series in general), which is "Antenna Radiation Patterns". So, without further do, let's get straight into it!


Antennas

     First of all, we should get into what Antennas are and how they are related with all that we talked about in Electromagnetic waves and Electromagnetism in general. Antennas are a way of tranmitting and receiving information through changes in the electromagnetic fields that surround them. Being based on Electromagnetism and EM waves, Antennas follow the principles of Wave Superposition, Wave Reflection, Wave Inversion, Standing waves and more. The most important might be the Standing Wave Ratio (SWR) which shows us the ratio of transmitted to reflected energy. We of course want to keep that ratio as close to 1:1 as possible.

Transmitting Information

    There are two types of information transfer, which are the FM (Frequency Modulation) and AM (Amplitude Modulation), that you are all familiar with, cause they are used in radio.

Frequency Modulation (FM)

    In this type of transfer, the information is being tranmitted by modifying the frequency of a carrier wave, as shown below:

[Image 2]

Amplitude Modulation (AM)

In this type, we keep the frequency constant and transmit the information by modifying the amplitude of the carrier wave, as shown below:

[Image 3]

The (Simple) Dipole Antenna

   The simplest structure of an Antenna is based on dipoles, which are two identical elements. That's why such a simple Antenna is called a Dipole Antenna. The shortest dipole antennas operate at one-half wavelength (λ/2) and establish standing waves along their length.

    Here's a beautiful gif image that shows you how they operate when connected to an alternating current (AC) voltage supply:

[Image 4]

    The changing electric and magnetic field's that are being produced at the antenna wire, create radio waves that propate outwards, following a specific radiation pattern that we will cover in-depth in a bit.

So, what exactly is happening inside of an Antenna Wire?

    As a sine-wave generator is attached to the wire it creates a time-varying voltage (potential difference) along the length of the wire. As a result of this applied potential difference that is constantly changing amplitude (or voltage magnitude) and polarity ('+' and '-' switch places), charges start moving inside of the wire, constantly speeding up, slowing down and changing direction of travel along the wire. As the charges move in one direction they create electric and magnetic fields that grow as the voltage increases. The magnetic field is of course caused by the changing electirc field, as changing electric fields are one of the ways with which we can produce magnetic fields. These fields are constantly changing with time and propagating outwards at the speed of light (speed of a EM wave in a vacuum that we can approximately consider as the speed in air also). After reaching the maximum voltage amplitude of the AC generator, the voltage starts decreasing again, therefore also decreases the magnitude of the magnetic and electric fields. When finally reaching "zero" magnitude the polarity reverses and starts increasing again, causing the charges to slow down, change direction and speed up again. This change in polarity also affects the polarity of the electric and magnetic field. This procedure continues on indefinitely (As long as we supply AC voltage).

     To understand this ever better, I suggest you to run the following simulation at PhET Colorado that shows you the changing electric fields generated by an electric charge:

https://phet.colorado.edu/sims/radiating-charge/radiating-charge_en.html

For the purposes of this article you should change the following Settings:

  • Manual -> Sinusoidal
  • Amplitude and Frequency (that show up when changing into Sinusoidal)

Of course you can also stay in "Manual"-Mode and just play with it! :P

Regions

    One last thing that we should note is that the outside region of an Antenna is splitted into regions:

  • The region close to the antenna, where d << λ (the distance is far less than a wavelength) where the near field is dominated by magnetic fields
  • The transition zone for 1-2 wavelengths (1-2 λ)
  • The far-field region (d > 2λ), where the electric field becomes dominant as it is more regularly patterned

    Most antennas operate in the far-field region, transmitting information over long distances through changing electric fields. Near-field antennas utilize strong magnetic fields in a region near an antenna and are used in near-field communication, where the communication is limited to a few wavelengths.

     Note that short doesn't mean that we have to use near-field communication. Radio transmitters such as nRF24 and Bluetooth devices that have a limited range, still operate based on far-field communication. RFID and NFC tags that have shorter ranges use near-field communication.

Reflectors

    To redirect the energy that would radiate behind an antenna, we use reflectors that propagate the incoming radiation in the forward direction. Such reflectors receive and capture energy from a large area and reflect this energy toward a receiving element. When transmitting, the electromagnetic radiation is therefore being  concentrated along a central axis. For example, UHF television antennas have four such reflectors that collect and reflect the radio waves that would otherwise pass by, having reflecting elements on the far side of a folded-dipole receiving element.

Directors

    Similar to reflecting elements, Directors are added to antennas to change the shape of the radiation pattern. The length and spacing of them is such that they absorb the energy and reemit it in-phase with the incoming waves, directly to the receiving element or directly from the transmitting element. That way we have a constructive interference (add-up of waves) only in the forward direction, whilst the waves form the side are absorbed and reemitted out-of-phase, leading to a destructive interference.


Antenna Properties

    Being a type of electronic circuit, antennas of course have electromagnetic properties (some of which we already know from previous articles), which are:

(Electric) Permittivity

     The permittivity of a material, gives us a measure oh how readily charges can align themselves (polarization) in the presence of an electric field. Higher permittivity indicates a stronger resistance when forming an electric field, which means a slower propagation of disturbance through the medium. A high-permittivity material that surrounds a low-permittivity material will not affect the frequency of oscillation, but the high-permittivity material reduces the speed of the wave's propagation.

Knowing that the velocity, frequency and wavelength are binded by:

     and knowing that the frequency doesn't change, we understand that what happens is  a reduction of wavelength. When reducing the wavelength the penetration through a material of course becomes more difficult. When embedding an antenna into a high-permittivity material, the size of the antenna can therefore be reduced in accordance with the decreased wavelength of the EM waves, when interacting with this material.

     Something worth noting is that waves can be inverted (180-degree phase shift) when travelling from a low-permittivity material to a high-permittivity material (or from a high-propagation-speed to a low-propagation-speed material).

(Magnetic) Permeability

   Another factor that we should keep in mind, is the magnetic permeability of the antenna. The signals emitted from antennas are electromagnetic radiation, where both electric and magnetic fields are involved. Both permittivity and permeability affect the propagation of electromagnetic waves, resulting into a slower wave speed and decreased wavelength.

You might remember the following equation for the speed-of-light:

where:

  • c is the speed of light
  • ε0 the permittivity of free space
  • μ0 the permeability of free space

     You can see that these two factors influence the speed of light, the same way as they affect the electromagnetic propagation through a material that has a specific of permittivity and permeability .

Directivity, Efficiency and Gain

   Let's consider a isotropic antenna, which is a theoretical point source that spreads electromagnetic energy equally in all directions. For this antenna with surface area = 4πr^2, we can define the total radiated power and power density the same way as we did in EM waves using integrals. [I will leave out the math]

    As actual antennas don't spread equally, we define a so called peak directivity, which is the ratio of the power densitity of a physical antenna in it's most concentrated direciton to that of a theoretical isostropic emitter of the same total power tranmission level. As a mathematical equation this looks as following:

    The directivity is expressed as an ordinary number that represents the ratio or in dB, where larger numbers represent more focused beams. An equally radiating antenna would have a directivity of 0 (0 dB).

Depending on the application we have:

  • Low-directivity antennas that transmit and receive information from all directions more or less equally./ These are used in mobile applications, where the direction of the transmitter and receiver can change
  • High-direcvitiy antennas that are able to transmit and receive information over greater distances, but have to be aimed towards another antenna. These are used in satellite television.

    Another important thing that we have to take into account is the efficiency of an antenna. The efficiency shows us the actual losses of a particular antenna design due to manufacturing fauls, surface coating losses, imperfections, impedance mismatch, or any other factor.

Combining the effect of directivity and efficiency, we talk about gain, which is:

    While directivity is always greater than or equal to 1 (0 dB), antenna gain can be less than 1 (0 dB). 


Radiation Patterns

   Different antennas produce different radiation patterns. The complexity of those patterns of course depends on the antenna's design and construction. A simple way of understanding all the things that we talked about until now (function of an antenna, directivity, etc.) is by taking a look at the radiation pattern. A Radiation pattern is diagrammatical representation of the distribution of radiated energy into space, as a function of direction. Graphically, we plot the electric and magnetic fields as a function of the angular and radial distance from the antenna, which means that we represent them in spherical coordinates as E (θ, Ø)  and H(θ, Ø).

The radiation pattern of dipole antenna can be for example:

[Image 5]

There are basically two ways of plotting radiation patterns:

  1. Field patterns -> Plotted as a function of electric and magnetic fields in logarithmic scale
  2. Power patterns -> Plotted as a function of the square of the magnitudes of the electric and magnetic fields in logarithmic or commonly dB scale

We also separate them based on the Dimensions as:

  • 3D Radiation patterns -> represented in spherical (r, θ, Φ) or cartesian coordinates (x, y, z)
  • 2D Radiation patterns -> that we get "dividing" the 3D into the horizontal (horizontal pattern) and vertical planes (vertical pattern)

The 3D power radiation pattern of a specific Antenna looks as following:

[Image 6]

    The previous two planes for E (electric field) and H (magnetic field) where already horizontal and vertical 2D radiation patterns, cause, as you might remember from EM waves, the electric and magnetic waves are perpendicular to each other.

Lobe Formation

  In radiation pattern representations we often come across different shapes, which indicate the major and minor radiation area. These so called Lobes show the radiation efficiency in different areas.

Let's consider the following radiation pattern of a dipole antenna:

[Image 7]

This radiation pattern is build up of:

  • a main lobe or major lobe, which is the major part of the radiated field that covers the largest area. At this area the maximum radiated energy is being emitted. The direction of this exact lobe indicates the directivity of the antenna.
  • the side or minor lobes, which are the areas where the power is being wasted
  • the back lobe, which is a "special" minor lobe as it is exactly in the opposite direction of the main lobe. A considerable amount of energy is wasted here. 

Common Types of Radiation patterns

Let's now get into some of the most common types of radiation patterns...

Omni-directional (or non-directional) pattern 

    Omnidirectional antennas, which are commonly reffered as "omnis" have usually a doughnut shape in three-dimensiona view. In two-dimensional view they form a figure-of-eight pattern. Omnidirectional antennas have usually more gain than a dipole, but a dipole is still an omni by just being aspecial case.

The 2D radiation pattern of the special case dipole is:

[Image 8]

    We already analyzed dipole antenna's as the "simple" antenna. Another form of Omni Antennas are the so called Collinear Omni Antennas, which have higher gain, multiple omnidirectional structures that can be arranged in vertical forming a so called collinear array. Of course higher gain doesn't mean higher power, as the same amount of power is just radiated in a more focused way. An example of such a pattern can be found in [Image 6], which by chance is a Omni radiation pattern.

Directional antennas

   Such antennas are used for coverage as well as point-to-point linkage. They can be of a variety of shapes that includes patch antennas, dishes, horns or a whole host. What they all have in common is radiating energy out in a particular direction.

Let's get into some of those more in-depth..

Patch antennas

     This is the simplest form of directional antenna. It's a single rectangular or circular conductive plate that is spaced above a ground plane. They have a low profile and ease of fabrication, which makes them pretty common. The radiation pattern of a single patch is characterized by one single main lobe of moderate beamwidth. Manipulating the beamwidth we can produce antennas with higher or lower gain. The so called azimuth and elevation plane patterns are derived by simply slicing through the 3D radiation pattern of the Patch Radiation pattern.

Patch array antennas

     Arranging multiple patch array antennas we end up with the so called patch array antenna. All these patch antennas are driven by the same source and consist of patches arranged in orderly rows and columns (rectangular array). Such an arrangement gives us higher gain and narrower beamwidth.

 Yagi antennas

      A Yagi antenna is formed by driving a simple antenna and shaping the beam using a well-chosen series of non-driven elements whose length and spacing are tightly controlled. Such a antenna radiates it's energy out in one main direction and are often enclosed in a tube.

Here's a picture of such a Yagi antenna:

[Image 9]

Sector antennas

   A sector antenna or sector panel is a specialized antenna that is frequenctly encountered in outdoor systems where wide coverage areas are desired. Often they are built from an array of dipoles placed in from of a shaped reflector. The size and shape of the reflectro determine the performance.

This is a sector antenna:

[Image 10]

Why are they useful?

   We already said that these kind of representation of the antenna's radiation, gives us information about the function, directivity, gain etc. of a specific antenna. A radiation pattern is similar to a road map, telling us where radiation is concentrated. We can determine the most important antenna characteristics. directly referring to that plot. What most antenna users are interested in is the directivity and beamwidth of the antenna. Another pretty popular antenna specification is the "front-to-back" (F/B) ration, which is defined as the difference in dB between the maximum gain or fron of the antenna (usually 0) and the point exactly 180 degrees behind the front. From the radiation pattern we can see where power is being radiated or received, telling us how much degradation we can expect when the antenna is not aimed correctly. This can be useful in cases where we might want to communicate with more than one station at once. The antenna plotting (radiation pattern) can assist in the proper aiming and optimum performance on all the desired signals/communications. Also, don't forget taht the weather may also affect the antenna's performance, meaning that the type of antenna mounting also plays a big role. Interfering signals might be picked up by the antenna, meaning that we can also determine the actual level of interference of such signals usind the radiation pattern, placing them in null or low sidelobe positions.

To sum up we can say that:

    Antenna radiation plots are an important tool for antenna designers and users alike. Knowing how to use them will go a long way to compare different antennas and alternative solutions. When the user has this type of data at his/her disposal, the antenna performance can be better optimized to the applications.

[Taken directly from reference article 5]


RESOURCES:

Reference articles:

  1. https://www.allaboutcircuits.com/technical-articles/an-introduction-to-antenna-basics/
  2. https://www.allaboutcircuits.com/technical-articles/antenna-basics-field-radiation-patterns-permittivity-directivity-gain/
  3. https://www.tutorialspoint.com/antenna_theory/antenna_theory_radiation_pattern.htm
  4. https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/prod_white_paper0900aecd806a1a3e.html
  5. http://www.astronwireless.com/topic-archives-antenna-radiation-patterns.asp

Image sources:

  1. https://commons.wikimedia.org/wiki/File:Patch_antenna_pattern.gif
  2. https://commons.wikimedia.org/wiki/File:Illustration_of_Frequency_Modulation.png
  3. https://en.m.wikipedia.org/wiki/File:Illustration_of_Amplitude_Modulation.png
  4. https://commons.wikimedia.org/wiki/File:Dipole_antenna_standing_waves_animation_461x217x150ms.gif
  5. https://commons.wikimedia.org/wiki/File:Radiation_Pattern_Dipole_PD.png
  6. https://commons.wikimedia.org/wiki/File:Vpol_dual_band_blade_antenna_blade_L1_3D.jpg
  7. https://commons.wikimedia.org/wiki/File:Sidelobes_en.svg
  8. https://commons.wikimedia.org/wiki/File:DipoleRadiation.gif
  9. https://upload.wikimedia.org/wikipedia/commons/1/1b/Yagi.gif
  10. https://en.wikipedia.org/wiki/File:Sector_antennas_with_dowtilts.jpg
All of the pictures that I used in this article are available under the Creative Commons (CC) License.

Mathematical equations that I had in this post where drawn using quicklatex!   


Previous articles of the Electromagnetism series

Here we only have the previous two "chapters" and the current one!

Mutual and Self Induction:

Mutual Inductance -> Mutual Inductance, applications

Self Induction -> Self Induction, Lenz's law, Inductance of a Coil

Magnetic Energy Density -> Energy stored in a magnetic field (or inductor), Magnetic energy density, Coaxial Cable Inductance Example

R-L circuits -> R-L circuit energizing, de-energizing, Characteristic time constant

L-C circuits -> L-C circuit, oscillations, energy cases, applications

R-L-C circuits -> R-L-C circuit, oscillation, applications

Mutual and Self Induction exercises -> examples all around Mutual and Self Induction

Alternating current:

Getting into Alternating current -> Phasor diagrams, Alternating current, Average (RMS) current and voltage, Differences, Advantages/Disadvantages

Electric Reactance in AC circuits -> Resistors, Inductor and Capacitor Reactance in AC circuits

Series R-L-C circuits Impedance -> Series R-L-C circuits, Phasor Diagrams, Impedance

Power in AC circuits -> DC Resistive circuit, Power in AC circuits (resistive, reactive), Power Factor

Resonance in Series R-L-C circuits -> Series R-L-C circuit, Series Resonance

Resonance in Parallel R-L-C circuits -> Parallel R-L-C circuit, Parallel Resonance 

AC Transformers -> How they work, Configurations, Types, Voltage and Current Transformer

Alternating current exercises -> examples all around Alternating current

Electromagnetic waves:

Electromagnetic Wave Introduction -> Electromagnetic waves, velocity, wave equation

Sine waves and EM wave energy -> Sine waves, energy density, EM wave power, Poynting vector, Radiation pressure / Energy momentum

Electromagnetic waves in matter -> Propagation, Angular distribution, polarization and scattering, Interaction with Conductors, Plasma and Dielectrics

Standing Electromagnetic waves -> Standing waves in general, Standing EM waves

Electromagnetic Spectrum -> Electromagnetic Spectrum, Kinds of Radiation/Light, Applications in Astronomy  


Final words | Next time

    And this is actually it for today's post and I hope that you enjoyed it! Next time we will get into some exercises/examples around EM waves, and after that I will also make a "All about Electromagnetism" article that will contain everything that we talked about in the Electromagnetism series (that consists of more than 70 articles!).

Keep on drifting!

Sort:  

Hi @drifter1!

Your post was upvoted by utopian.io in cooperation with steemstem - supporting knowledge, innovation and technological advancement on the Steem Blockchain.

Contribute to Open Source with utopian.io

Learn how to contribute on our website and join the new open source economy.

Want to chat? Join the Utopian Community on Discord https://discord.gg/h52nFrV



This post has been voted on by the steemstem curation team and voting trail.

There is more to SteemSTEM than just writing posts, check here for some more tips on being a community member. You can also join our discord here to get to know the rest of the community!

This is a very good introduction post of antenna and EM transmission.
Good level of details and the text is well written and easy to understand.
Thanks for all the work!

Coin Marketplace

STEEM 0.36
TRX 0.12
JST 0.039
BTC 69965.85
ETH 3540.49
USDT 1.00
SBD 4.71