Ultraviolet and Infrared Photography - Play structure at Chattahoochee Bend State Park

in #colorchallenge5 years ago

I was wrapping up my adventure for the day at this state park, when I came across a really cool looking play structure tucked away with no one around.

These photos are my posts for #colorchallenge

rw-1190445.jpeg

Camera ModelLumix GH3, modified by LifePixel for Full Spectrum
LensOlympus M.ZUIKO DIGITAL ED 12mm-50mm
FilterB+W UV Black (403) Filter
Aperturef/3.8
Shutter Speed1/500 sec
Film Speed800
SpectrumUltraviolet-A and Infrared (UVA and IR)
Wavelength320 to 385 nm and 750 nanometers
LocationChattahoochee Bend State Park GA, USA.

rw-1190444.jpeg

I took a little time and took some photos of this interesting looking structure, along with the ultraviolet blue sky casting through the support beams and ropes.

rw-1190447.jpeg

It was a sunny day and nice and bright out on the playground, made for good photography.

rw-1190448.jpeg

There was a rope swing as well, alot of fun features to play with.

rw-1190451.jpeg

I really enjoyed seeing all the rope work included in this structure. It was a great design for a state park. After putting my camera down I played on it a little myself.

These images are being hosted by Spee.ch
An image hosting service on top of the LBRY protocol.

Makingblocks.xyz/about


I take pictures with a special camera. Its a Mirrorless DSLR that has been modified by Life Pixel to see light in other wavelengths. This allows my camera to see light in the Infrared [IR] around 1300 NM wavelength, through the visual spectrum and into the Ultraviolet A and B wavelengths roughly into the 300 NM wavelength.

I carry many filters on me to make the photos you see in my blog, these filters screw on my lens and help me isolate certain wavelengths for certain scenes. These filters can be IR / UV pass-through filters to assist me get a natural photo taking out the UV and IR light. Or I may use a Infrared pass-through filter capture just IR light. I can do the same with UV light as well, though I need some better filters which they can cost a few hundred dollars for true Ultraviolet pass through filters. So for right now I have B + W 403 bandpass filters that still allow some IR light in, due to their cheaper material.

There are also exotic glasses made of sapphire and germanium I am open to working with to replace my silica glass hot mirror with a material that allows even longer wavelengths of infrared to enter my cameras sensor. Special sensors, lenses and filters of that material would be needed as well, so it would be a big project but one that may give some even more unique photography results.

Bitbacker.io/user/solominer/

Addresses below to help me buy better camera equipment and support me to travel to locations to do photo and video and overall great blogs in new places. I would be happy to list some of the contributors in my posts for donations that help me along the way.

CoinAddress
BTC:bc1qhfmvd2gywg4fvrgy2kkkkyqta0g86whkt7j8r7
LTC:ltc1qdyzm5cwgt8e2373prx67yye6y9ewk0l8jf3ys9
DASH:XkSqR5DxQL3wy4kNbjqDbgbMYNih3a7ZcM
ETH:0x045f409dAe14338669730078201888636B047DC3
DOGE:DSoekC21AKSZHAcV9vqR8yYefrh8XcX92Z
ZEN:znW9mh62WDSCeBXxnVLCETMx59Ho446HJgq

PlatformURL/Username
Steemhttps://steempeak.com/@solominer
Steem Monstershttps://peakmonsters.com/@solominer/collection
Wekuhttps://main.weku.io/@solominer
Bit.Tubehttps://bit.tube/solominer
MithrilSolominer
DiscordSolominer#4248
Bitcointalkhttps://bitcointalk.org/index.php?action=profile;u=83228
CryptoPanichttps://cryptopanic.com/solominer
Whaleshareshttps://whaleshares.io/@solominer
Bearshareshttps://bearshares.com/@solominer
Publish0xhttps://www.publish0x.com/solominer

Sort:  

white trees looks nice

@o4wx ah yeah it's the infrared reflecting off the leaves.

Posted using Partiko Android

Congratulations, Your Post Has Been Added To The Steemit Worldmap!
Author link: http://steemitworldmap.com?author=solominer
Post link: http://steemitworldmap.com?post=ultraviolet-and-infrared-photography-play-structure-at-chattahoochee-bend-state-park


Want to have your post on the map too?

  • Go to Steemitworldmap
  • Click the code slider at the bottom
  • Click on the map where your post should be (zoom in if needed)
  • Copy and paste the generated code in your post
  • Congrats, your post is now on the map!
Loading...

Coin Marketplace

STEEM 0.32
TRX 0.12
JST 0.034
BTC 64647.93
ETH 3160.25
USDT 1.00
SBD 4.09