Making A Ips

in #ips6 years ago

Hope everyone is well. If you do not like this tune can not read. We sincerely want everyone to be well. Now let's talk about the work. The upcoming World Cup Cricket, as well as due to Boro cultivation, can understand the condition of electricity. What has started now I am thinking of thinking about building an IPS for the house. I thought I would take you along. Someone may be needed. Someone else may be able to cooperate with his own experience.
Whatever it takes: (I've bought so far)

51a4f61593d6d-Untitled-10.jpg

  1. Battery

This battery will depend on the amount of backup time you want. If you are satisfied with just running 4-5 energy bulbs and a fan like me, then you can buy 50 amperes. Can not tell the price right now, but 4500-5000 And there is also a year's replacement guarantee. Sometimes the batteries of the truck or other car are down or changed in the same way. You can find a better battery in them.

Now if you do not want to get into big trouble, buy an IPS circuit and get it setup. You can buy at a price of 3500.

  1. Inverters

I used my UPS in this place. It's 600 watts. You can buy Chinese Inverter in the market at any Electronics Store. These will take prices around one thousand. There is no guarantee or warranty. So buy on the watch. Note that the output of the UPS inverter or how many watts . Because you can run several things together, depending on the watt . Think about those who are less aware of Watt, your UPS is 600 watts. Your room's bulb is 30 watts + your fan 70 watts. Total 100 Watts. Now you have to calculate how much your load is. But it is better to run the flower without loading. The less you load, the more you get the backup. This topic is published by V / A. I did not go past

  1. Charger
    One charger will be required to charge your battery. The charging system that has UPS can not charge such a battery. And even if it is full charge it will take two days. Once you have gone to power, you use the battery. Do not get backed up once loaded after one hour. So use UPSA as an inverter only. I know your computer's power supply works best. No, I'm not saying that you have to open the power of your PC. Instead, buy a power supply of 300-500 rupees from the market. If the power supply is good , then it should be modified for the on / off if it is shown in the figure, by adding two pins (green and black 14 and 15) according to the picture shown.

Then take one of the lines that you have on your hard disk or CDROM to find yellow and black ones. These two wires will charge your battery. Leave the rest of the tape together and tie it apart.

Your work is over for now. Now put a line in your Invert er / UPS output and give it some bulbs and fan connections. Now add two battery terminals with Invert er / UPS.

Sort:  

You got a 1.99% upvote from @postpromoter courtesy of @seaquester2!

Want to promote your posts too? Check out the Steem Bot Tracker website for more info. If you would like to support the development of @postpromoter and the bot tracker please vote for @yabapmatt for witness!

Coin Marketplace

STEEM 0.29
TRX 0.12
JST 0.033
BTC 63457.41
ETH 3119.12
USDT 1.00
SBD 3.94