Box of Tunes Project Part 5

Got a little more done. Here are links to past posts if you don't know what I'm doing or would like a refresher.

Intro Post. https://steemit.com/steemit/@bgrass/steem-funding-a-project

Part 1. https://steemit.com/steemit/@bgrass/steem-funding-a-box-of-tunes-project-part-1

Part 2. https://steemit.com/diy/@bgrass/box-of-tunes-project-part-2

Part 3. https://steemit.com/diy/@bgrass/box-of-tunes-project-part-3

Part 4. https://steemit.com/diy/@bgrass/box-of-tunes-project-part-4

Here are some pictures of what it looks like now.

I got the holes cut in the front panel for the speakers and ports, cut a little hole in the back panel for speaker wires to come through and I got those both glued into place. I also cut a notch out of the top so you can get to the controls on the amplifier. I know the holes are a little rough, but when the speakers are installed, you won't see the holes, and then there is going to be a speaker grill that covers the front panel as well, so I'm not to worried about how they look. Oh, also I glued some foam panels I cut out to inside of the box to help keep any annoying resonance down. I put some poly fill stuff in their too.

Next step is going to involve lots of sanding to get the square and not so square parts to line up, as well as smoothing out the corners to get it ready for staining. After that process is over, I think I'll be able to get this buttoned up pretty quick. I think the end is in sight. Next update hopefully it will look a little prettier.

Thanks for reading,

Brian