Lasercutter Build Log - Laser Tube mounts, Mirror mounts and Z-axis modification

Did some more work today on the laser cutter build

Here is the first mirror now mounted. The laser will first bounce off this mirror over to the X-axis mirror

I have made it height adjustable as we can see here

Here is one of the tube mounts that has been mounted onto a shelf I made out of extrusion

It isn't going anywhere...

Here is the other tube mount

And finally, I didn't like how I had the idler pulleys before for the Z-axis so I modified their location. This has allowed it to be able to be tightened easier as well as take up less room in the control area.