Kinds and the impact of hard water into the human body, but do not try to drink it or watering people with hard water !!!

in #homesteading6 years ago

What is sulfuric acid? How will it affect human exposure?

The degree of acidity is measured using a unit of pH (potential of Hydrogen). pH is measured on a scale from 0 to 14. Pure neutral water, at a temperature of 25 degrees Celsius, has a pH of 7.0.

Solutions with a pH less than 7.0 indicate acidic properties, and solutions with a pH greater than 7.0 are said to be alkaline or alkaline.

Basically hard water contains high acid levels so it has destructive properties. There are four types of acids that are generally classified as hard water. They are HCL (hydrochloric acid), HNO3 (nitric acid), H3PO4 (phosphoric acid), and H2SO4 (sulfuric acid).

The concentration of HCL acid is usually about 38 percent, HNO3 (68 percent), H3PO4 (70 percent), and H2SO4 (96 percent).

Hydrochloric acid is commonly used in dyestuff and ordinary industries are also used to clean metal surfaces before soldering, as well as removing rust and steel crust.

This type of acid is contained naturally in our bodies, humans, but in a small degree. The stomach wall produces this substance to help the digestion of food.

But on the wall of the stomach there is a goblet cell that serves to produce a kind of layer of mucus to protect the stomach wall from HCL. HCL therefore does not damage the stomach.

HCL is also the cause of the so-called high acid stomach conditions for patients with ulcer disease.

Nitric acid is used to test precious metals, because of its properties that can dissolve metals such as gold and platinum. This substance is also a component of natural acid rain phenomenon.

Phosphoric acid is dedicated to soap and detergent making materials, toothpaste, water treatment, as well as use in the food industry to provide a sour taste.

While industrial sulfuric acid, used by manufacturers of iron and steel to remove oxidation, rust, and crust before being sold to the automotive industry. Other uses are to make artificial fertilizer like phosphoric acid. In the chemical industry, these substances are used as dryers and reagents, also used for batteries.

Due to high acid levels, this hard water is very damaging if exposed to the human body. When it comes to skin tissue, hard water reacts with proteins that make up skin tissue.

Sulfuric acid will cause an exothermic reaction, a chemical reaction that generates heat. That is why if exposed to sulfuric acid will happen skin burn reaction.

Hard water is a strong solid acid solution. When the water hard on the skin, will cause severe pain and the skin will burn, even in some cases the bones will melt. Examples of hard water are sulfuric acid used for the hydrochloric acid to clean the surface of the metal before soldering, nitric acid to test the precious metal, and phosphoric acid to make phosphate salts.

Though dangerous, hard water is easy to get. Sulfuric acid can be obtained at mechanical stores as it becomes an important part of the battery. While nitric acid is also commonly used in gold shops or jewelry as it is necessary to purify gold and metal. Medium acid chloride is also widely used for the manufacture of cosmetics or drugs.

hard water is not a liquor as we know it, but water that has a very hard level if touched by our body, thank you, and congratulations to read it hopefully we are not wrong to use it. @reserse

Coin Marketplace

STEEM 0.28
TRX 0.12
JST 0.033
BTC 69692.63
ETH 3775.19
USDT 1.00
SBD 3.76