ANTI-THEFT DEVICE | BAG-ZER | BAG BUZZER | Vlog # 2

in #howto6 years ago (edited)


Hello Steemians,

We all know that Stealing is a very common crime at school so I made a simple device on how to stop the theft from stealing and I asked help from my brother Clifford Capa. This device is our idea in our Investigatory project and I realized that maybe this device can help a lot of people to prevent the theft from stealing. Everyone can make this Device because it's pretty simple and I'll be giving some instruction on how to make the device. There will be a video for the making of the device and I hope it will serves as your guide while making the device/Bag-zer. The reason why I called it Bag-zer it's because I'm using a Buzzer and a Bag or in short BAG-ZER.

You don't need enough money to buy the following materials all you need to buy is the Buzzer , Battery holder and Switch because some of the materials is a common material at home. You can buy Buzzer in any electronic shops the rate of the Buzzer is at 40 to 50 Pesos or 1$, while the Switch is at 40 to 50 Pesos also or 1$ and the Battery holder is at 30 to 50 Pesos or 1$. If you don't have any Soldering Iron you can just borrow from a friend or any relatives of yours. So if you want to learn on how to make this device just follow and watch my Vlog for guidance. Just click the picture for the Vlog.

These are the following materials;

  • Soldering Iron
    image1.jpeg

  • Soldering Leadimage3.jpeg

  • Battery holder
    image3 (1).jpeg

  • Buzzer image4.jpeg

  • Switchimage5.jpeg

  • Clipimage2 (1).jpeg

  • Recycled Adapter image1 (1).jpeg

  • Double AA Batteryimage2.jpeg

  • Electrical tape IMG_20180510_210459.jpg

  • Velcro IMG_20180510_210539.jpg

  • Scotch Tape IMG_20180510_210521.jpg

  • Needle and thread IMG_20180510_210512.jpg

Note: You don't need to buy the other materials, you can just borrow it from a friend or neighbor.

Procedures;

  • Gather all the required materials that is stated above.
  • Make a hole at the tip of clip. Then put a screw or any metal in the hole
  • Connect the buzzer to the battery using wire. Then connect the battery to the screw. Make a chip using any cartoons or thick papers.
  • Paste the buzzer into the clip using glue gun then paste the battery case together with the clip with buzzer then put it inside the bag near at the zipper.

THE BAGZER
image1 (3).jpeg

I HOPE YOU ENJOY!
THANK YOU!


▶️ DTube
▶️ IPFS
Sort:  

You have been upvoted by the @sndbox-alpha! Our curation team is currently formed by @jeffbernst, @bitrocker2020, @jrswab & @teachblogger . We are seeking posts of the highest quality and we deem your endeavour as one of them. If you want to get to know more, feel free to check our blog.

Coin Marketplace

STEEM 0.30
TRX 0.12
JST 0.034
BTC 64058.80
ETH 3150.15
USDT 1.00
SBD 3.99