Setting up a wet/dry/wet guitar rig for recording - Pulpo Studios.

---

This was a little wet/dry/wet setup experiment I did to record some guitar layers for Stanley Parker's song ''Si hablamos de cambiar'' from his album ''Dulce Motora'' , since we had to do many soundscaping we needed to capture some big keyboard like guitar pads so we ended up setting this up.

The way this particular setup worked was as follows:

The guitar was connected straight to a RJM Tone Saver Buffer/Splitter , a little device with a normal and isolated output to be able to split the signal easily. The normal output went straight to the VOX AC15 in the middle giving us our dry sound. The isolated output was connected to the TC electronic Flashback X4 with the ''drykill switch'' engaged , this meant that the dry signal was eliminated and only the delays would sound. The two outputs from the TC pedal would then feed the two Wangs combos , these combos were copies of the Fender Super Champs , hence having a much cleaner sound than the VOX. This way we had one guitar line splitted out twice and feeding 3 amps! We did have fun with this setup but never did it again hahaha , now when needed we just use a 2 amp setup and get pretty much the same results.

This was the song where we used this , what do you think about the soundscapes?

https://open.spotify.com/track/26N38553tR1BSwHlyVZ6w1

---

Steepshot IPFS IOS Android Web