Bulletproof Glass | How to stop the bullets?
The mind was lost in some place; How to protect yourself from bullets? There can be no more fast than the rifle or pistol guns, even the bullets that you can not see. This can be the only way to survive; There should be something in front of your body that will crush the bullet and stop it. And this is the idea behind bulletproof glass.At a glance, bulletproof or bullet resistant glass is just like any normal glass. The bullet-resistant glass is made to bear a few rounds of resistance, but how much of it can be prevented depends on how thin the glass is used, and the bullet used by a tool. The question is, having a feature in a glass prevents a fast super-fast bullet to look like a normal glass? Let's try to understand the detail science behind it ...
Bulletproof glass
Those who are reading this article, you are most likely to like cricket, and many may play very well. One thing surely must be noticed when the ball is in a hurry, there is a lot of pain in the hand when it comes to holding a dynamic force with your hands fixed. But no matter how fast the ball is, it takes a little less pain if you push your hand while holding the ball and move it back.To say mechanically, it takes less pain to change the position of your hand at the same rate of change in the force of the ball. So, when you take the ball, you will feel less pain as much as your arm moves away from the ball.
You do not have the ability to carry a normal glass like your hand, if someone shoots on a normal glass, the glass does not have the ability to swallow the power of firing or crooked; As a result, the glass can not bear the bullet injury, which does not change the strength of the bullet. And this is the difference between a normal glass and bulletproof glass.A solid glass is then strong plastic and glass again plastic is thus made up to many levels, this glass is made entirely and this process is called lamination. This process makes bulletproof glass much thicker than normal glass. The resistant glass density usually ranges from 7 millimeters to 75 millimeters.
When a bullet hit the bullet in the bullet, the bullets of energy are spread across the sideways. Because the bullet's energy is divided into several parts; Instead of just crossing a single glass, here's a tough glass together then a strong plastic glass again, again the plastic needs to overcome a few levels. Due to many layers, the bullet energy spreads all the way around and its energy is absorbed by different layers.The speed of the bullet does not remain the same as it is absorbed by the energy, it gets completely stuck in one level and the ability to penetrate the final layer before it is lost. Think Bulletproof Glass is a "energy absorbent" glass, but you can get a better idea.
Use?
source
Especially in areas where there is a need for strong security, bulletproof glass is seen to be used. It is widely used in banks and in the car's windows. Nowadays this glass is available in different sizes and different sizes. However, the glass that has the most layer of the glass will be thick enough and will retain the ability to hold as many rounds as possible.Maybe a thicker glass may be a problem in the bank, but when it comes to a president's car window, it can be protected as much as possible. Again, there is a problem with making the resistant glass more thick, it will be rotated on the other hand - there will be many layers to come through the Kano light.