ıphone batary change

First of all, you need to have a small Phillips screwdriver. After opening the screws at the bottom of the phone, you should insert the pick between the screen and the case from below with the help of a pick. If the device is a little warm, your work will be better seen and the risk of screen breakage will decrease. After opening the screen, you need to open the battery cages with a Mercedes-head screwdriver. After opening the cages, remove the battery socket. This is important, the device may fall into a short circuit, the battery is plugged in, no action should be taken, remove the display sockets after removing the socket, your job will be easier, you can even heat the device in a pan :) or you can pour zippo under the battery, slowly pull the tapes and insert the battery. After removing the battery, clean the adhesives because the remaining adhesives lose their function and dislodge the new battery. You can complete the process by turning off the device by attaching the adhesives and inserting the battery into its socket. If the newly installed battery has a charge, use it until it runs out, then leave it on until it is charged to 100% full capacity and you can use it efficiently ( ( I msorry my broken english)
!