Step by step, manufacturing of footwear
I tell them about the manufacturing process I learned from an early age, alternating with my high school studies in my free time, I went to the small factory that my uncle has and observed the procedure to get to know him, starting as an assistant, then I learned each one of the steps, until I myself elaborate them to 100%.
There are many models and many types but today I will show you the manufacturing process of an ar2 supervisor model as we call them here.
The process takes work and dedication and begins with:
- Cut off each of the pieces of the footwear and cut off the inner insole and send all the pieces of footwear to the sewing kit to assemble each of the pieces.
- Place the eyelets and press them with the machine so that they are firm in the footwear.
- Apply yellow glue to the cut so it can adhere to the inner template.
- Start to assemble the footwear and the internal template in the mold to shape the footwear.
- With the help of tacks to hold and pliers shape the upper part of the footwear.
- Already with the shape of the footwear made we put the plant to mark it and have a reference
- We proceed to sand the plant and the shoe exactly where we mark it.
- Now that the plant has been sanded, we can apply plastic glue, repeating the process 2 times with an interval of 5 minutes.
- To the footwear we also put plastic glue to him as well as to the plant in the part that we mark and sanding giving him two returns.
- We light the oven and wait a few minutes until hot, we introduce the footwear we wait 15 seconds and introduce the plant, after 30 seconds, we remove both and place the plant with great care in the part that was marked placed the glue.
- Immediately we introduce the footwear in the press so that both parts are fully adhered, pressing it for an approximate time of 1 minute.
- At the end of the minute we can remove the footwear and place the anatomical insole for comfort and their respective braids.
- Leather for the elaboration of footwear..
- Plant.
- clamp pliers.
- Tacks.
- Eyelets.
- Braids.
- Internal template for the preparation.
- Plastic glue(Insarplast 2000, orange pot).
- Yellow glue(Contac 1000, blue pot).
- Anatomical template.
- Scissors.
- Knife.
- Mold.
- Brush.
Cut out template
----------------------Trimming of leather parts
Press hard so that they are well subject
Gif of the process
To mold footwear
Gif of the process
Result when the process is completed
Trace Reference
Process with the plant
---------------Process with footwear
Perform process slowly to cover in full
Perform process slowly so as not to stain the shoes outside the line
Carry out with caution so as not to place the plant incorrectly
The two parties adhere completely
Moment when it leaves the press
---------------------Footwear completely finished
Thus we will have completed the process of manufacturing safety footwear, the materials necessary for its preparation are the following:
Models that I have also been able to manufacture previously
I hope you enjoyed the boot manufacturing process.
follow me on my social networks
All images are my property, taken with my Alcatel cell phone
It is a great job! Awesome.
thanks greetings
You do an excellent job, the finishing of the pieces, exceptional. I congratulate you for your work.
Thank you very much, I like that you like my work. regards
Me gustaría tener ese conocimiento y esas herramientas.
¿Se puede hacer una suela con caucho de carro?
Saludos.
es fácil con practica se aprende, nunca lo e intentando seria interesante
Congratulations! This post has been upvoted from the communal account, @minnowsupport, by erick777 from the Minnow Support Project. It's a witness project run by aggroed, ausbitbank, teamsteem, theprophet0, someguy123, neoxian, followbtcnews, and netuoso. The goal is to help Steemit grow by supporting Minnows. Please find us at the Peace, Abundance, and Liberty Network (PALnet) Discord Channel. It's a completely public and open space to all members of the Steemit community who voluntarily choose to be there.
If you would like to delegate to the Minnow Support Project you can do so by clicking on the following links: 50SP, 100SP, 250SP, 500SP, 1000SP, 5000SP.
Be sure to leave at least 50SP undelegated on your account.